May 02, 2024

2021-2022 Course Catalog

2021-2022 Course Catalog [ARCHIVED CATALOG]

Course Descriptions

Below are course descriptions for credit courses offered by MCC. Each course can be identified by a lettered subject and a course number followed by the title and a series of numbers. Those courses with a zero as the first digit of the course number are designated as developmental and may not be used to fulfill degree requirements.

BIOS 1010 - General Biology

5.0 - 3.0 - 6.0

Key:
course subject (BIOS)
course number (1010)
course title (General Biology)
course may be offered online
course may be offered in hybrid format
lecture/classroom hours per week (5.0 -)
lab/clinical hours per week (- 3.0 -)
credit hours (- 6.0)

Requisites for a course are detailed as follows:

Prerequisites – A prerequisite - or its equivalent - must be met before a student can register for a course. A prerequisite may be a specific high school course, another MCC course, a demonstrated proficiency, or acceptance into a certain program. Students must meet the prerequisite in effect for the quarter in which they are taking the course. Prerequisites may be waived on the basis of proficiency testing and/or the recommendation of an appropriate faculty member or academic dean.
Corequisites – Corequisites are required program courses that must be taken simultaneously, a grouping of courses that must all be taken within the same quarter. In some cases, previous completion of the required course is acceptable.
Recommended - Certain courses, proficiencies, or conditions may be recommended for the student prior to or at the same time as the course. While these recommendations are suggested for student success in the course, they are not required.

Hybrid courses – A hybrid course is a coordinated approach to learning, using both online technology and classroom interaction with faculty and peers. MCC hybrid courses meet face-to-face 50 percent of the traditional quarter’s campus meetings; the other 50 percent of campus meeting time is replaced with online study and learning activities.

Course Filter
Filter this list of courses using course prefix, course code, keywords or any combination.
Prefix:	Code or Number:	Keyword or Phrase:
Choose Course Prefix	Choose Course Number	Choose Keyword
Find whole word or phrase only.


Physical Education
	PHED 1000 - Physical Education for Health 1.5 Credits This course provides information regarding muscle type and function. It gives attention to both aerobic and anaerobic physical training techniques consistent with a healthy lifestyle. Students develop and follow a personalized goal-directed exercise program. The course covers motivational techniques and dietary considerations. Lec: 1 Lab: 1.5 Cr: 1.5 View Class Schedule
	PHED 1010 - Physical Education for an Active Lifestyle 2.5 Credits This course provides information regarding muscle type and function. It gives attention to both aerobic and anaerobic physical training techniques consistent with an active lifestyle. Students develop and follow a personalized goal-directed exercise program. The course covers motivational techniques and dietary considerations. Lec: 1 Lab: 4.5 Cr: 2.5 View Class Schedule
	PHED 2900 - Special Topics in Physical Education Variable Credits This course permits instruction in special content areas not included in other physical education courses. Lec: Variable Lab: 0 Cr: Variable View Class Schedule
Philosophy
	PHIL 1010 - Introduction to Philosophy 4.5 Credits Offered: Online, Hybrid Philosophy begins with asking the right questions about fundamental ideas. Students explore questions about the nature and limits of free will, the contents of reality, the criteria for a good life, the limits of human knowledge, the character of justice, and the threshold of possibility. By exploring these and related questions through readings from the major areas of philosophy, and by practicing the methodology of philosophical inquiry, students develop competency in critical and scientific thinking and in cultural awareness. Recommended: Placement into or completion of Level I English course. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 1030 - Professional Ethics 4.5 Credits Offered: Online Students define major ethical theories. Ethical values are applied to individual actions, local and global business activities. The impact of ethical values on the workplace, the environment, the economy, and the society is explored and evaluated. Recommended: College or business level reading comprehension and writing skills recommended prior to taking this course, but not required. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 1100 - Critical Reasoning 4.5 Credits Students apply the skills of critical reasoning to everyday language. Students evaluate information and analyze arguments. Students relate successful decision making with the application of critical reasoning. Recommended: College or business level reading comprehension and writing skills recommended prior to this course but not required. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 2030 - Introduction to Ethics 4.5 Credits Offered: Online Students acquire critical reasoning skills necessary to solve ethical dilemmas and avoid obstacles to ethical reasoning. Students distinguish criteria associated with the major ethical theories. Students recognize the value of exploring opposing views. Students explore contemporary and historical controversial ethical issues. Students apply critical reasoning, and ethical theory to construct solutions to real world ethical problems. Recommended: College or business level reading comprehension and writing skills recommended prior to the course but not required. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 2200 - Introduction to Comparative Religion 4.5 Credits Students investigate the spiritual and historical complexities of indigenous and organized religions. Students examine rituals, symbols, myths, allegories, and sacred texts to discover fundamental shared values. Students explore the historical, ethical, social, and economic impact of religions on global cultures. Students acquire a greater respect for the diversity and value of religions with the expectant outcome of increased empathy and tolerance. Recommended: College or business level reading comprehension and writing skills recommended prior to the course but not required. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 2400 - Philosophy and Literature 4.5 Credits Offered: Online, Hybrid Students encounter the stories by which humans shape the world, exploring questions like: How do our values and beliefs shape our stories? How do stories determine our values and beliefs? Our stories come in various formats from fable to epic poem, from traditional five-act play to graphic novel. While exploring such stories, students hone critical and creative thinking skills, cultivate an appreciation for various cultural expressions, and develop techniques for conveying values and ideas in writing. Prerequisites: (1) Any philosophy or literature course, or instructor permission must be completed prior to taking this course. Recommended: Level 1 English or Level 1 English placement Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 2600 - Contemporary Issues in Philosophy 4.5 Credits Students cultivate skills in scientific, critical, and creative thinking, in cultural awareness, and in information literacy by grappling with the pressing problems of the information age. These problems involve the following questions: What is the relationship between machine and human in the quickly-changing 21^st Century? How are ethical standards determined in virtual reality, social media, MMORPGs, scientific research, or cyberspace? How does this changing world affect gender and race identities? How does power shape what we study or do in medical or environmental science? How does technology change us? By seeking answers for these, students develop an intellectual integrity that is essential for success as technology users and human persons in the new millennium. Prerequisites: (2) PHIL 1010 and PHIL 1100 or PHIL 2030 ; or instructor approval must be completed prior to taking this course. Recommended: Level 1 English or Level 1 English placement. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PHIL 2900 - Special Topics in Philosophy Variable Credits Students cultivate skills in scientific, critical, and creative thinking, in communication, in cultural awareness, and in information literacy by grappling with questions that invite special inquiry-questions about religious or political controversies, mathematical logic, cultural values, medical or environmental ethics, social theory, the foundations of scientific method, legal theory, or justice. Such topics are explored directly or by special focus on the work of a specific philosophical figure. Prerequisites: (1) Instructor approval must be completed prior to taking this course. Lec: Variable Lab: 0 Cr: Variable View Class Schedule
Photography
	PHOT 1101 - Basic Digital Photography 6 Credits Students are introduced to digital photographic image-making and printing. Emphasis is on camera operation, photographic composition, and technical and conceptual understanding of the photographic medium. All work is evaluated regularly in critiques. Students must have access to a digital camera with manual aperture and shutter controls for this class and a portable, external hard drive. Type of camera used is up to the instructor’s discretion. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1102 - Basic Analog Photography 6 Credits Students are introduced to analog (film-based) photographic image-making and printing. Image capture will be done through the use of a Single Lens Reflex camera and 35mm black and white film. Students will utilize a traditional, photography darkroom in order to create a series of black and white prints from negatives they created with their cameras. Emphasis is placed on camera operation, darkroom printing, photographic composition, ability, conceptual understanding, and the overall quality of the final prints. All work is evaluated regularly in critiques. Students will be provided a 35mm SLR camera with manual aperture and shutter controls for this class. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1103 - Intermediate Digital Photography 6 Credits This course surveys digital imaging and processing methods relevant to photography. Students continue the work of basic photography to capture digital images and examine in greater depth image-editing applications and digital printing processes. Students produce a portfolio of creative work based on technical, aesthetic and conceptual criteria. Prerequisites: (1) with a grade of C or better PHOT 1101 must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1104 - Intermediate Analog Photography 6 Credits In this intermediate-level course, students continue their investigation and application of black and white photography by using medium and/or large-format cameras and fiber-based black and white printing applications. Prerequisites: (1) with a grade of C or better Take PHOT 1102 must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1105 - History of Photographic Practice 6 Credits Students become acquainted with photographic imagery of the past and present. Students learn photography’s interrelationship with society and culture, art and technology, and the principles of visual design. Prerequisites: (1) with a grade of C or better Take PHOT 1101 must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1106 - History of Photographic Process 6 Credits Students become acquainted with photographic processes and applications of the past and present. Students discover photography’s interrelationship with society and culture, as well as with art and technology. Students study various photographic processes and then demonstrate those processes while creating work towards their own visual goals. Prerequisites: (1) PHOT 1102 with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1107 - Basic Photography Lighting 6 Credits Students are introduced to studio flash photographic lighting. Students work with digital technology and lighting equipment in a studio setting to design the appropriate lighting for the subject. All work is completed using the student’s personal digital camera and printed in the digital lab. Prerequisites: (2) PHOT 1101 and PHOT 1103 with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1108 - Basic Experimental Photography 6 Credits Students continue the practical application of processes learned in PHOT 1106 . Students learn to use popular historical process and contemporary techniques as a means of reaching new visual goals. Students create work that demonstrates how historical photographic processes can be used in a contemporary context. Prerequisites: (1) PHOT 1106 with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 1500 - Moving Image Lab 6 Credits This course is an overview of methods used in moving-image production. By investigating the pre-production, production, and post-production processes, students achieve an understanding of how these principles integrate with still photography, video production, and multimedia. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 2105 - Photographic Concept Development 6 Credits Students learn the practical steps necessary to move from the formation of an idea to the professional execution of that idea. Students also address contemporary issues in the realm of fine art and commercial photography. Prerequisites: (1) PHOT 1103 or PHOT 1104 with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 2107 - Intermediate Photographic Lighting 6 Credits Utilizing the information obtained in the Basic Photographic Lighting course, students advance their knowledge of electronic photographic lighting equipment and modification. Students learn to use and modify the off camera flash (speedlights), as well as balancing natural and artificial light, photographing on location in large and small spaces, and the creative application of flash techniques. Prerequisites: (1) PHOT 1107 with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 2108 - Intermediate Experimental Photography 6 Credits Students continue the process-related image-making techniques introduced in Basic Experimental Photography (PHOT 1108 ). Students learn to combine modern technology with historical photographic processes. Students use computerized equipment to create or modify a camera for use with plates or papers with hand applied photographic emulsions. These processes are developed further with increased attention on perfecting and repeating processes with the outcome of students sharing their work through a suite of prints. Students produce work that demonstrates technical proficiency, image content and conceptualization. Prerequisites: (1) PHOT 1108 with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 2200 - Portfolio Development and Professional Practices 6 Credits Through critical feedback, students build a comprehensive portfolio of photographic work using skills, processes, and concepts acquired in earlier photography courses. Additionally, students learn ethical, legal, financial, and aesthetic issues pertinent to contemporary photography. Prerequisites: Successful completion of 12 credits of PHOT electives with a grade of C or better must be completed prior to taking this course. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PHOT 2900 - Special Topics in Photography Variable Credits PHOT 2900 - 2908 These courses permit instruction in special content areas not included in other photography courses. Prerequisites: (1) Instructor approval must be completed prior to taking this course. Lec: Variable Lab: Variable Cr: Variable View Class Schedule
	PHOT 2981 - Internship Variable Credits Students work in a professional photography or video workplace. Types of work involved may include photography, assisting with cameras, darkroom work, equipment handling, set preparation, video production and post-production, and audio production and post-production. Based on state guidelines, students must complete 40 hours of work for each credit hour. Prerequisites: (1) Instructor approval must be completed prior to taking this course. Lec: Variable Lab: Variable Cr: Variable View Class Schedule
Physics
	PHYS 110A - Principles of Physics IA 2.5 Credits This course is the first of an algebra-based college physics sequence. The course is taught as three courses (PHYS110A, 110B, and 110C), all of which must be successfully completed to transfer as a semester-length course. Topics include kinetics, vectors, Newton laws, work and energy. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and MATH 1315 or higher must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 110B - Principles of Physics IB 2.5 Credits This course is the first half of an algebra-based college physics sequence. The course is taught as three courses (PHYS 110A, 110B, and 110C), all of which must be successfully completed to transfer as a semester-length course. Topics for this portion of the course include momentum, rotational motion, gravitation, and fluids. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 110A must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 110C - Principles of Physics IC 2.5 Credits This course is the first half of an algebra-based college physics sequence. The course is taught as three courses (PHYS 110A, 110B, and 110C), all of which must be successfully completed to transfer as a semester-length course. Topics for this portion of the course include kinetic theory, heat, and thermodynamics. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 110B must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 111A - Principles of Physics IIA 2.5 Credits This course is a continuation of the algebra-based sequence of college physics. The course is taught as three courses (PHYS 111A, 111B, and 111C), all of which must be successfully completed to transfer as a semester-length course. Topics include waves, sound, and electricity. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 110C must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 111B - Principles of Physics IIB 2.5 Credits This course is a continuation of the algebra-based sequence of college physics. The course is taught as three courses (PHYS 111A, 111B, and 111C), all of which must be successfully completed to transfer as a semester-length course. Topics include electricity and magnetism. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 111A must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 111C - Principles of Physics IIC 2.5 Credits This course is a continuation of the algebra-based sequence of college physics. The course is taught as three courses (PHYS 111A, 111B, and 111C), all of which must be successfully completed to transfer as a semester-length course. Topics include light optics, and select topics in modern physics. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 111B must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 210A - General Physics IA 2.5 Credits This course is the first of a calculus -based college physics sequence. This course is taught as three courses (PHYS 210A, 210B, and 210C), all of which must be successfully completed to transfer as a semester-length course. Topics include kinematics, vectors, Newton laws, work, and energy. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and MATH 2410 must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 210B - General Physics IB 2.5 Credits This course is the first of a calculus-based college physics sequence. The course is taught as three courses (PHYS 210A, 210B, and 210C), all of which must be successfully completed to transfer as a semester-length course. Topics include momentum, rotational motion, gravitation, and fluids. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 210A must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 210C - General Physics IC 2.5 Credits This course is the first of a calculus-based college physics sequence. The course is taught as three courses (PHYS 210A, 210B, and 210C) all of which must be successfully completed to transfer as a semester-length course. Topics for this portion of the course include kinetic, heat, and thermodynamics. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 210B must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 211A - General Physics IIA 2.5 Credits This course is a continuation of the calculus-based college physics sequence. The course is taught as three courses (PHYS 211A, 211B, and 211C), all of which must be successfully completed to transfer as a semester-length course. Topics for this portion include waves, sound, and electricity. NOTE: The corequisite MATH 2411 may be taken prior to or concurrently with PHYS 211A/B. This course includes both lecture and lab components. Prerequisites: (3) MATH 2410 ; PHYS 210C ; and college-level reading, writing, and math proficiency must be completed prior to taking this course. Pre/Corequisite: (1)MATH 2411 must be taken prior or at the same time as this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 211B - General Physics IIB 2.5 Credits This course is a continuation of the calculus-based college physics sequence. The course is taught as three courses (PHYS 211A, 211B, 211C), all of which must be successfully completed to transfer as a semester-length course. Topics for this portion of the course include electricity and magnetism. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 211A must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 211C - General Physics IIC 2.5 Credits This course is a continuation of the calculus-based college physics sequence. The course is taught as three courses (PHYS211A, 211B, and 211C), all of which must be successfully completed to transfer as a semester-length course. Topics for this portion of the course include light, optics, and selected topics from modern physics. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 211B must be completed prior to taking this course. Lec: 2 Lab: 1.5 Cr: 2.5 View Class Schedule
	PHYS 1010 - Applied Physics 4.5 Credits This course provides a general understanding of the basic principles and practical applications of mechanics, heat, electricity, magnetism, and light. This course includes both lecture and lab components. Prerequisites: (2) College-level reading, writing, and math proficiency; and MATH 0931 or MATH 0960 must be completed prior to taking this course. Lec: 2.5 Lab: 6 Cr: 4.5 View Class Schedule
	PHYS 2500 - High Altitude Balloon Experience 1.5 Credits This course introduces students to the world of high-altitude ballooning (HAB). It provides the background necessary to design a pod with scientific sensors and to participate in the launch and retrieval of a balloon with the payload attached. It is a five-week course with the schedule appropriate to an individual quarter. Prerequisites: (2) College-level reading, writing, and math proficiency; and PHYS 1010 ; or PHYS 110A , PHYS 110B ; and PHYS 110C ; or PHYS 210A , PHYS 210B , and PHYS 210C ; or instructor approval must be completed prior to taking this course. Lec: 1.5 Lab: 0 Cr: 1.5 View Class Schedule
	PHYS 2900 - Special Topics in Physics Variable Credits This course permits instruction in special content areas not included in other physics courses, depending on interest and relevancy to curriculum. Lec: Variable Lab: 0 Cr: Variable View Class Schedule
Plumbing Apprenticeship
	PLAP 1110 - Plumbing IA 7 Credits This course is an introduction to the plumbing trade for plumbing apprentices. It covers the history of plumbing along with the commonly used materials, tools, and equipment. The course teaches apprentices math used in the plumbing trade. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 1120 - Plumbing IB 7 Credits This course is a continuation of the introductory material. The apprentice continues working on math for the plumbing trade. Prerequisites: (1) PLAP 1110 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 1121 - Plumbing IC 6 Credits This course is a continuation of first year plumbing apprenticeship classes. The course concentrates on the math skills used in the plumbing trade. Prerequisites: (1) PLAP 1120 must be completed prior to taking this course. Lec: 6 Lab: 0 Cr: 6 View Class Schedule
	PLAP 1150 - Grey Water Recycling 3 Credits This course covers the proper way to collect and reuse grey water. Grey water collection serves two purposes: cutting down on both the amount of freshwater needed and the wastewater generated by a building. Lec: 3 Lab: 0 Cr: 3 View Class Schedule
	PLAP 1210 - Plumbing IIA 7 Credits This course covers the sizing and design of water, waste, and vent systems in residential applications using MUD and Omaha Plumbing Code rules. Students become familiar with residential blueprints and isometric drawings used in residential applications. Prerequisites: (1) PLAP 1121 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 1220 - Plumbing IIB 7 Credits This course provides a better understanding of the Omaha Plumbing Code. Using the knowledge acquired, students apply the code requirements to field work and lab projects. Students also continue gaining proficiency using plumbing math. Prerequisites: (1) PLAP 1210 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 1221 - Plumbing IIC 6 Credits This course continues to build on the math skills covered in Plumbing IIA and IIB. The course covers the drawings used in the plumbing trade such as house, five-story and X-Y walls. The Omaha plumbing code and MUD rules and regulations are also covered. Prerequisites: (1) PLAP 1220 must be completed prior to taking this course. Lec: 6 Lab: 0 Cr: 6 View Class Schedule
	PLAP 2310 - Plumbing IIIA 7 Credits Students develop proficiency in the use of the Omaha Plumbing Code. Students review and use the math skills necessary to be successful in the plumbing trade. MUD and ADA regulations are also covered. Prerequisites: (1) PLAP 1221 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 2320 - Plumbing IIIB 7 Credits Students continue both the review of the Omaha Plumbing Code from PLAP 2310 and the math covered in previous courses. Tyler projects, house drawings, and five-story drawings are also covered. Prerequisites: (1) PLAP 2310 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 2330 - Print Reading for Plumbers 3.5 Credits This course helps the apprentice gain the basic knowledge needed to read blueprints, create shop drawings, and make isometric illustrations of a plumbing system. Prerequisites: (1) PLAP 2320 must be completed prior to taking this course. Lec: 3.5 Lab: 0 Cr: 3.5 View Class Schedule
	PLAP 2410 - Plumbing IVA 7 Credits This course prepares apprentice plumbers for the City of Omaha Journeyman Plumber Test. This is achieved by providing an intense focus on the Articles from the City of Omaha Plumbing Code. The instructors utilize practical projects and written tests to help students prepare for this goal. Prerequisites: (1) PLAP 2330 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
	PLAP 2420 - Plumbing IVB 7 Credits This course reviews the Omaha Plumbing Code, job-site safety, and math skills required for the plumbing trade. Review and application of classroom knowledge prepares the apprentice to successfully take the journeyman plumbers test. Prerequisites: (1) PLAP 2410 must be completed prior to taking this course. Lec: 7 Lab: 0 Cr: 7 View Class Schedule
Plumbing Technology
	PLBG 1010 - Introduction to Plumbing 9 Credits Students are introduced to the plumbing trade including history, tools, materials, safety, math skills, work ethic, and careers in the industry. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PLBG 1020 - Basic Residential Plumbing 9 Credits Students continue to learn the residential side of plumbing, focusing mainly on wood structures, materials, and tools. The items discussed in this course direct attention on wood-framed structures such as single and multi-family dwellings along with the different types of materials and tools that are commonly used with these structures. Prerequisites: (1) PLBG 1010 must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PLBG 1030 - Basic Commercial Plumbing 9 Credits Students study the commercial side of the plumbing trade. The focus is on metal stud framed, masonry, and concrete structures. The items discussed in the class direct attention to the metal, masonry, and concrete structures along with the different types of materials and tools that are common with these structures. Prerequisites: (1) PLBG 1020 must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
Political Science
	POLS 1010 - Introduction to Urban Studies 4.5 Credits This course is designed to provide basic information about the field of urban studies and includes in-depth analyses of the issues, concepts, theories, and discourses of urban studies. Topics covered include the process of urbanization, American and comparative urban settlement patterns, urban and local government administration, economic development and growth, political economy perspectives, suburbanization and sprawl, urban planning, and urban lifestyles. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	POLS 1050 - State and Local Government 4.5 Credits This course is a survey of state and local government. Political, economic, social and cultural factors are considered. It also includes an examination of the following topics: a comparative analysis of the structure and function of the 50 American state governments; policy determination process and the significant variables that pattern this process; broad introduction to the political structure and operations of state and local governments; role and power of state and local governments; government institutions; political parties and interest groups; public policy; and state constitutions. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	POLS 2050 - American National Government 4.5 Credits Offered: ONLINE This course is an introduction to American national government, including a study of the structural function of the political system and the elements of constitutionalism, republicanism, and federalism. It includes the party system and an analysis of the U.S. Constitution. The course is a descriptive, institutional approach with considerable attention to the policy-making process. Recommended: College-level reading skills Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	POLS 2060 - The Constitution 4.5 Credits Offered: ONLINE This course focuses on some of the great issues that confront policy makers and citizens of the United States. The framework for study is the U.S. Constitution. Topics include executive privilege and delegation of powers; war powers and covert action; nomination, election, and succession of the president; criminal justice and a defendant’s right to a fair trial; crime and insanity; crime and punishments; campaign spending; national security and freedom of the press; school prayer; gun control; right to assemble; right to live; right to die; immigration reform; affirmative action; and federalism. Recommended: College-level reading skills Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	POLS 2070 - Contemporary Social and Political Issues 4.5 Credits Offered: ONLINE This course examines the social and political issues relevant to the 21st century through reading, discussion, and media. The overall theme of the course is globalization and global understanding. Topics include peacemaking and nonviolence; women and world order; education, hunger, and food distribution; ecological balance; international law and organization; human rights and social justice; world political economy and economic justice; militarism and the arms race; religious perspectives on justice and peace; and culture, community values, and change. Recommended: College-level reading skills Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	POLS 2900 - Special Topics in Political Science Variable Credits This course permits instruction in special content areas not included in other political science courses. Prerequisites: (1) Instructor approval must be completed prior to taking this course. Lec: Variable Lab: 0 Cr: Variable View Class Schedule
Precision Machine Technology
	PRMA 1050 - Print Reading 3 Credits Students develop skills required for visualizing and interpreting industrial prints and freehand technical sketching. Topics include identifying prints, drafting and print-reading procedures, machining specifications, geometric dimensioning, and tolerancing. Lec: 3 Lab: 0 Cr: 3 View Class Schedule
	PRMA 1400 - Precision Machine Safety/Principles 4 Credits Students learn machine safety, metrology and metallurgy along with basic machine principles related to hole making bench work and layout. Lec: 4 Lab: 0 Cr: 4 View Class Schedule
	PRMA 1401 - Machine Tool I 9 Credits This course introduces machines, tools, and processes associated with the machine trade. It covers fundamentals in bench layout, metal removal processes, drill presses, and horizontal and vertical saws. This course also covers the use of all precision measuring tools. NOTE: Completion of PRMA 1401 with a grade of C or better is required to advance to the next level class. Recommended: PRMA 1400 is recommended at the same time as this course, but not required. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PRMA 1402 - Machine Tool II 9 Credits Students construct basic machine projects using various pieces of shop equipment including milling machines, engine lathes, drill presses, and grinders. Students focus on safety as well as setup and accuracy of completed projects. Prerequisites: (2) PRMA 1400 and PRMA 1401 with a grade of C or better must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PRMA 1403 - Machine Tool III 9 Credits Students construct advanced projects using various pieces of shop equipment including milling machines, engine lathes, drill presses, and grinders. Students focus on safety as well as setup and accuracy of completed projects. Prerequisites: (1) PRMA 1402 with a grade of C or better must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PRMA 1404 - Machine Tool IV 9 Credits Students construct advanced projects using various pieces of shop equipment including milling machines, engine lathes, drill presses, and grinders. The course focuses on safety as well as setup and accuracy of completed projects. Prerequisites: (1) PRMA 1403 with a grade of C or better must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PRMA 2410 - CNC I 9 Credits This course introduces CNC machines with emphasis on machine setup and operation of the CNC mill and CNC lathe. Students spend time learning and writing basic G-Code functions needed for straight-line milling, hole-making, tapping, and engraving. Prerequisites: (1) PRMA 1404 with a grade of C or better must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PRMA 2412 - CNC II 9 Credits Students gain introductory knowledge and skills in using Cad/Cam software Mastercam. Students learn about geometry creation, drawing of 2D parts, saving programs, tool paths, creating lines and arcs, and bolt circles. Prerequisites: (3) PRMA 2410 , DRAF 1100 and DRAF 2100 with grade of C or better in all must be completed prior to taking this course. Lec: 9 Lab: 0 Cr: 9 View Class Schedule
	PRMA 2414 - CNC III 4 Credits This course allows students to sharpen skills learned in CNC I and CNC II while working on advanced projects. The combination of both the mill and lathe are used. Students use Mastercam software to complete instructor approved projects. Prerequisites: (1) PRMA 2412 with a grade of C or better must be completed prior to taking this course. Lec: 4 Lab: 0 Cr: 4 View Class Schedule
	PRMA 2500 - Tool and Die Technology 4 Credits This course covers the fundamentals of basic die theory and design. Prerequisites: (1) PRMA 2414 with a grade of C or better must be completed prior to taking this course. Lec: 4 Lab: 0 Cr: 4 View Class Schedule
	PRMA 2510 - Die Design and Construction 4 Credits In this course, students design and construct a basic die. Prerequisites: (1) PRMA 2500 with a grade of C or better must be completed prior to taking this course. Lec: 4 Lab: 0 Cr: 4 View Class Schedule
	PRMA 2900 - Special Topics in Precision Machine Technology Variable Credits This course permits instruction in special content areas not included in other courses of the Precision Machine Basics (PMBCC) Program. Prerequisites: (1) Instructor approval must be completed prior to taking this course. Lec: Variable Lab: 0 Cr: Variable View Class Schedule
Process Operations Technology
	PROT 1000 - Introduction to Process and Power Operations 4.5 Credits Students gain basic knowledge and skills to use various equipment and components found in the process and power operations industry. Topics include preventive and predictive maintenance, safety, lubrication, precision measuring devices, compressors, pumps, valves, steam systems, heat exchangers, cooling systems, and process instrumentation. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 1010 - Safety Topics for Manufacturing, Process and Power Operations 4.5 Credits Students learn how safety topics apply to manufacturing, process and power industries. During this course students have the ability to earn the OSHA 10 hour Industrial Safety credential. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 1020 - Introduction to Process Operations in Manufacturing Technology 4.5 Credits Offered: HYBRID This course is designed to introduce students to the process, operations, and theory found in various manufacturing industries. Students become familiar with manufacturing design, production process and flow, production machine operations, and product logistics. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 1030 - Introduction to Quality and Continuous Improvement 4.5 Credits Offered: HYBRID This course introduces students to quality and continuous improvement as it relates to process, power, and manufacturing. Topics include drawings and symbols, properties and behavior of materials, quality management principles, techniques, and tools. Students gain skills in measurement and analysis along with components and system calibration. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 1100 - Process Instrumentation and Control 4.5 Credits This course introduces instruments and controls used to monitor, maintain, and control industrial processes. Topics include instruments used to measure, record, monitor, maintain and adjust temperatures, pressures, flows, and levels. Lec: 3.5 Lab: 3 Cr: 4.5 View Class Schedule
	PROT 1110 - Reading and Understanding Process Diagrams 2 Credits This course introduces students to symbols, labels, and diagrams used in the process and power industry. This course also introduces students to reading and understanding process diagrams. Lec: 2 Lab: 0 Cr: 2 View Class Schedule
	PROT 1250 - Basic Electricity for Manufacturing, Power and Process 6 Credits Through lectures, discussions, demonstrations, coaching and problem solving, students learn and apply general electrical theory used in manufacturing, process, and power industries. Students study electron theory as it relates to ac and dc circuits. Students study various circuits, resistance, capacitance, inductance, symbols, and wiring diagrams. Lab assignments allow students to demonstrate an understanding of electrical theory, measuring, and control devices. The course emphasizes safety, as students are working with actual controls and voltages. Lec: 5 Lab: 3 Cr: 6 View Class Schedule
	PROT 1302 - Stationary Engineering I 3 Credits This course provides basic instruction in low- and high-pressure boilers in the stationary engineering field. This is the first of two courses designed to help students obtain a City of Omaha, Third Grade Stationary Engineers Certificate. (Formerly INCT 1302) Lec: 3 Lab: 0 Cr: 3 View Class Schedule
	PROT 1320 - Fuel Handling 3 Credits This course introduces students to skills generally required for entry-level employment in a steam power plant. Topics include the safety, systems, equipment, and procedures required in handling coal, oil, gas, or nuclear fuel to generate electricity in a power plant. Lec: 3 Lab: 0 Cr: 3 View Class Schedule
	PROT 2020 - Manufacturing Prototyping 4.5 Credits This course introduces the basic concepts of additive manufacturing (AM) in the past, present and future. Students produce parts and assemblies using diverse prototyping technologies. Emphasis is placed on human-centered design, low volume production, the intersection of quality, cost, speed and materials, environmental impacts, and the scale of production. Prerequisites: (2) PROT 1020 and INFO 1951 must be completed prior to taking this course. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 2200 - Dynamics of Process Control 4.5 Credits This course introduces students to the application of physics, chemistry, and math as they apply to the concepts of process control. Topics include relationships dealing with energy, heat, temperature, pressure, solids, liquids, gasses, fluid systems, and heat transfer found in various processing plants. Prerequisites: (3) CCHEM 1210 and CHEM 1211 , or CHEM 1212 ; and MATH 1410 ; and PHYS 1010 must be completed prior to taking this course. Lec: 3.5 Lab: 3 Cr: 4.5 View Class Schedule
	PROT 2210 - Ethanol Process Fundamentals 3.5 Credits This course introduces students to theory and process fundamentals used in ethanol and other process industries. Topics include distillation, evaporation, dehydration, and separation as they apply to processing plants. Lec: 2.5 Lab: 3 Cr: 3.5 View Class Schedule
	PROT 2302 - Stationary Engineering II 4 Credits This course provides advanced instruction in steam boilers, HVAC equipment, and related systems in the stationary engineering field. Formerly INCT 2302) Lec: 4 Lab: 0 Cr: 4 View Class Schedule
	PROT 2310 - Steam Plant Operation I 4.5 Credits This course introduces students to skills generally required for entry-level employment in a steam power plant. Topics include the generation of steam, valves, and piping used in the power plant; thermodynamics and heat transfer; pump theory and design; and water purification and treatment. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 2320 - Steam Plant Operation II 4.5 Credits This course introduces students to skills generally required for entry-level employment in a steam power plant. Topics include boiler theory, boiler design, boiler components and types, combustion systems, boiler accessories, boiler operation and maintenance, steam turbines, condensers and cooling towers, auxiliary steam plant equipment, and environmental control systems. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 2330 - Steam Plant Operation III 6 Credits This course introduces students to skills generally required for entry-level employment in a steam power plant. Topics include diesel engine theory and design, gas turbine theory and design, air-compressor theory and design, refrigeration theory and chiller design, electric generator theory and design, electrical distribution, electrical systems management, and fire safety. Lec: 6 Lab: 0 Cr: 6 View Class Schedule
	PROT 2410 - Nuclear Plant Operation I 4.5 Credits This course introduces students to skills generally required for entry-level employment in a nuclear power plant and provides students with the general systems and components associated with a nuclear power plant. This course follows the associate degree program recommendations outlined in the Uniform Curriculum Guide for Nuclear Power Plant Operator, Non-Licensed Operations Personnel developed by the Nuclear Energy Institute. Prerequisites: (4) CHEM 1010 ; PROT 2320 ; PROT 2330 ; and MATH 1410 must be completed prior to taking this course. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PROT 2420 - Nuclear Plant Operation II 3 Credits This course introduces students to skills generally required for entry-level employment in a nuclear power plant. Topics include basic atomic structure, basic nuclear interactions and reactions, the basic fission process, and basic reactor operation. This course follows the associate degree program recommendations outlined in the Uniform Curriculum Guide for Nuclear Power Plant Operator, Non-Licensed Operations Personnel developed by the Nuclear Energy Institute. Prerequisites: (1) PROT 2410 must be completed prior to taking this course. Lec: 3 Lab: 0 Cr: 3 View Class Schedule
	PROT 2900 - Special Topics in Process Operations Technology Variable Credits This course permits instruction in special content areas related to the Process Operations Technology program. Lec: Variable Lab: 0 Cr: Variable View Class Schedule
	PROT 2981 - PROT Internship 4.5 Credits The internship provides students the opportunity to apply their knowledge, learn new techniques, and get on-the-job training in the process, power and manufacturing industries. Based on state guidelines, students must complete 40 hours of work for each credit hour in the course. Lec: 0 Lab: 16.4 Cr: 4.5 View Class Schedule
Psychology
	PSYC 1000 - Psychology for Everyday Living 4.5 Credits This course provides a survey of the major themes in psychology and explores applications for daily living. Topics include adult development, personal problem-solving and motivation, anger management, parenting, stress management, and intimacy issues. NOTE: PSYC 1000 is highly recommended for vocational technical careers. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PSYC 1010 - Introduction to Psychology 4.5 Credits Offered: ONLINE HYBRID This course is an introduction to the science of psychology, including the application of critical thinking to the study of learning theory, memory, personality, growth and development, biological and neurological aspects, abnormal behavior, therapies, intelligence, motivation, emotion, sensation, perception, and theoretical perspectives. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PSYC 1110 - Parenting and Family Problem Solving 4.5 Credits Offered: ONLINE This course introduces students to effective parenting skills and strategies for solving family problems. It emphasizes parent-child relations, developmental milestones, family systems theory, family communication, family composition, and issues related to abuse and neglect. Students explore parenting challenges, such as single parenthood, divorce, custody issues, step-family systems, and conflict management. Other topics include same-sex parenting, inter-racial families, and families faced with natural disasters and other catastrophes. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PSYC 1120 - Human Growth and Development 4.5 Credits Offered: ONLINE This course addresses the stages of the human life span: prenatal, infancy, toddlerhood, middle childhood, adolescence, adulthood, and gerontology. For each stage of the life span, the course examines cognitive, language, emotional, social, personality, and physical development. In addition, students explore the procedures used to conduct research about human development. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PSYC 1130 - Cognitive Development 4.5 Credits Offered: ONLINE This course examines current cognitive theories utilized in the field of education. The course is an in-depth study of the stage theories and their application to experiential and developmental environments. As students study stages of development, they learn implications for adaptation in the educational classroom setting. Students gain experience in assessing cognitive levels, reporting such findings, and planning curriculum to enhance development. Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule
	PSYC 2140 - Behavior Modification and Principles of Learning 4.5 Credits Offered: ONLINE This course exposes students to the history and various theoretical approaches to the study of learning and behavior modification. Students have opportunities to learn applied behavior modification techniques including observing and recording behavior and formulating and writing behavioral objectives. This course includes an examination of motivation, attitude formation, and cognitive intervention approaches. Recommended: Reading assessment and college-level reading skills Lec: 4.5 Lab: 0 Cr: 4.5 View Class Schedule

Page: 1 <- 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14

Contract All Courses | Print this page.

Print this Page

Course Descriptions

PHED 1000 - Physical Education for Health

PHED 1010 - Physical Education for an Active Lifestyle

PHED 2900 - Special Topics in Physical Education

PHIL 1010 - Introduction to Philosophy

PHIL 1030 - Professional Ethics

PHIL 1100 - Critical Reasoning

PHIL 2030 - Introduction to Ethics

PHIL 2200 - Introduction to Comparative Religion

PHIL 2400 - Philosophy and Literature

PHIL 2600 - Contemporary Issues in Philosophy

PHIL 2900 - Special Topics in Philosophy

PHOT 1101 - Basic Digital Photography

PHOT 1102 - Basic Analog Photography

PHOT 1103 - Intermediate Digital Photography

PHOT 1104 - Intermediate Analog Photography

PHOT 1105 - History of Photographic Practice

PHOT 1106 - History of Photographic Process

PHOT 1107 - Basic Photography Lighting

PHOT 1108 - Basic Experimental Photography

PHOT 1500 - Moving Image Lab

PHOT 2105 - Photographic Concept Development

PHOT 2107 - Intermediate Photographic Lighting

PHOT 2108 - Intermediate Experimental Photography

PHOT 2200 - Portfolio Development and Professional Practices

PHOT 2900 - Special Topics in Photography

PHOT 2981 - Internship

PHYS 110A - Principles of Physics IA

PHYS 110B - Principles of Physics IB

PHYS 110C - Principles of Physics IC

PHYS 111A - Principles of Physics IIA

PHYS 111B - Principles of Physics IIB

PHYS 111C - Principles of Physics IIC

PHYS 210A - General Physics IA

PHYS 210B - General Physics IB

PHYS 210C - General Physics IC

PHYS 211A - General Physics IIA

PHYS 211B - General Physics IIB

PHYS 211C - General Physics IIC

PHYS 1010 - Applied Physics

PHYS 2500 - High Altitude Balloon Experience

PHYS 2900 - Special Topics in Physics

PLAP 1110 - Plumbing IA

PLAP 1120 - Plumbing IB

PLAP 1121 - Plumbing IC

PLAP 1150 - Grey Water Recycling

PLAP 1210 - Plumbing IIA

PLAP 1220 - Plumbing IIB

PLAP 1221 - Plumbing IIC

PLAP 2310 - Plumbing IIIA

PLAP 2320 - Plumbing IIIB

PLAP 2330 - Print Reading for Plumbers

PLAP 2410 - Plumbing IVA

PLAP 2420 - Plumbing IVB

PLBG 1010 - Introduction to Plumbing

PLBG 1020 - Basic Residential Plumbing

PLBG 1030 - Basic Commercial Plumbing

POLS 1010 - Introduction to Urban Studies

POLS 1050 - State and Local Government

POLS 2050 - American National Government

POLS 2060 - The Constitution

POLS 2070 - Contemporary Social and Political Issues

POLS 2900 - Special Topics in Political Science

PRMA 1050 - Print Reading

PRMA 1400 - Precision Machine Safety/Principles

PRMA 1401 - Machine Tool I

PRMA 1402 - Machine Tool II

PRMA 1403 - Machine Tool III

PRMA 1404 - Machine Tool IV

PRMA 2410 - CNC I

PRMA 2412 - CNC II

PRMA 2414 - CNC III

PRMA 2500 - Tool and Die Technology

PRMA 2510 - Die Design and Construction

PRMA 2900 - Special Topics in Precision Machine Technology

PROT 1000 - Introduction to Process and Power Operations

PROT 1010 - Safety Topics for Manufacturing, Process and Power Operations

PROT 1020 - Introduction to Process Operations in Manufacturing Technology

PROT 1030 - Introduction to Quality and Continuous Improvement

PROT 1100 - Process Instrumentation and Control