May 16, 2024  
2021-2022 Course Catalog 
    
Catalog Navigation
  Catalog Home
  The College
  Board of Governors
  Academic Calendar
  About the MCC Catalog
  Enrollment
  Registration
  Financial Matters
  Student Services
  MCC Learning Initiatives
  Community Initiatives
  Academic Policies and Procedures
  General Education
  A Place to Start
  Transfer Information
  Degrees and Certificates
  Programs by Division
  Programs A-Z
  Course Descriptions
  Faculty
  Educational Terms
  College Policies and Procedures
  Catalog Addendums
  General Education Courses
  My Portfolio
HELP
2021-2022 Course Catalog [ARCHIVED CATALOG]

Course Descriptions

Below are course descriptions for credit courses offered by MCC. Each course can be identified by a lettered subject and a course number followed by the title and a series of numbers. Those courses with a zero as the first digit of the course number are designated as developmental and may not be used to fulfill degree requirements.

BIOS 1010 - General Biology

5.0 - 3.0 - 6.0

Key:
course subject (BIOS)
course number (1010)
course title (General Biology)
course may be offered online
course may be offered in hybrid format
lecture/classroom hours per week (5.0 -)
lab/clinical hours per week (- 3.0 -)
credit hours (- 6.0)

Requisites for a course are detailed as follows:

  • Prerequisites – A prerequisite - or its equivalent - must be met before a student can register for a course. A prerequisite may be a specific high school course, another MCC course, a demonstrated proficiency, or acceptance into a certain program. Students must meet the prerequisite in effect for the quarter in which they are taking the course. Prerequisites may be waived on the basis of proficiency testing and/or the recommendation of an appropriate faculty member or academic dean.
  • Corequisites – Corequisites are required program courses that must be taken simultaneously, a grouping of courses that must all be taken within the same quarter. In some cases, previous completion of the required course is acceptable.
  • Recommended - Certain courses, proficiencies, or conditions may be recommended for the student prior to or at the same time as the course. While these recommendations are suggested for student success in the course, they are not required.

Hybrid courses – A hybrid course is a coordinated approach to learning, using both online technology and classroom interaction with faculty and peers. MCC hybrid courses meet face-to-face 50 percent of the traditional quarter’s campus meetings; the other 50 percent of campus meeting time is replaced with online study and learning activities.
 

Spanish
  

  • SPAN 2981 - Spanish for Business Internship

    Variable Credits
    This internship provides students with the opportunity to work in a business setting where Spanish is used. It prepares business students to use Spanish in the workplace and/or to expose students to a bilingual/international business setting. To develop an internship to meet their academic and career goals, students must meet with their faculty advisor. Based on state guidelines, students must complete 40 hours of work for each credit hour.

    Prerequisites: (1) SPAN 2051   must be completed prior to taking this course.
    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule
  

  • SPAN 2982 - Spanish for Healthcare Internship

    Variable Credits
    The internship provides the opportunity to work in a medical setting that offers Spanish interpretation experience. To meet academic and career objectives, students must meet with program faculty prior to enrollment. Based on state guidelines, students must complete 40 hours of work for each credit hour. (Formerly Spanish for Medical Personnel Internship)

    Prerequisites: (1) SPAN 2061   must be completed prior to taking this course.
    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule

Speech
  

  • SPCH 1110 - Public Speaking

    4.5 Credits
    Students learn both theoretical and practical instruction for speaking effectively in public. Topics include topic selection, audience analysis, speech preparation and organization, support of speeches with credible research, strategic and creative language use, effective listening and delivery skills, and common types of public speeches.

    Recommended: ENGL 1010  
    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • SPCH 1120 - Argumentation and Debate

    4.5 Credits
    Students experience a practical approach to the rudiments of argumentation and debate. This course tests the students’ ability to critically research, listen, speak, think, and argue in intelligent, logical discourse. Students are able to understand and apply the art of debate by the end of the course.

    Prerequisites: (1) ENGL 1020 , SPCH 1110 , PHIL 1100 , or instructor approval must be completed prior to taking this course.
    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • SPCH 1220 - Communication in Small Groups

    4.5 Credits
    This course provides students with theories of small group communication and small group decision making, and it provides a non-threatening arena for the practice of these processes within the small group. Students who work, or expect to work, in small groups or teams in the workplace benefit from this course.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • SPCH 1300 - Interpersonal Communication

    4.5 Credits
    This course introduces theories of communication between two people in a variety of contexts and situations. Students learn how to analyze and understand the communication in interactions and relationships and develop a vocabulary with which to discuss and critique the communication within those relationships. This knowledge is used to improve students’ day-to-day communication skills.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • SPCH 2900 - Special Topics in Communication

    Variable Credits
    This course permits instruction in special content areas not included in other speech courses. Topics include advanced public speaking preparation and presentation, rhetorical criticism, and media analysis.

    Prerequisites: (1) SPCH 1110   must be completed prior to taking this course.
    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule

Theatre
  

  • THEA 1000 - Introduction to Theatre

    4.5 Credits
    Offered: ONLINE

    Students survey the various facets of art and craft of theatre, with emphasis on the relationship between theatre and culture as well as theatre’s contributions to literature, film, and television. All elements and professions of theatre are explored: the dramatist, the producer, the director, the actor, the production designers, the stage manager, the tech director and crew, and the role of the audience. An overview of theatre history and theatrical genres is included.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 1110 - Theatre Technology I

    4 Credits
    Beginning and experienced students learn the basic arts and crafts of technical theatre in a professional theatre environment. The course includes overviews of the procedure and safety issues and practices set construction, lighting, and costume. It is a prerequisite for admission to the certified Theatre Technology Apprentice program offered through the Omaha Community Playhouse.

    Lec: 3 Lab: 3 Cr: 4


    View Class Schedule
  

  • THEA 1120 - Theatre Technology II

    4 Credits
    Students continue work begun in THEA 1110  with focus on real work situations and experiences. Topics include overview and practice in properties, scenic painting, and sound design and support. Students also begin work in their chosen areas of emphasis. These areas include sound, lights, construction, scenic painting, costume, props, stage management, box office, and house management.

    Prerequisites: (1) THEA 1110  must be completed prior to taking this course.
    Lec: 2.5 Lab: 4.5 Cr: 4


    View Class Schedule
  

  • THEA 1130 - Theatre Technology III

    4 Credits
    Students continue the work begun in THEA 1110  and THEA 1120  with focus on real work situations and experiences, continuing their rotation within their selected artistic areas of emphasis. These areas include sound, lights, construction, scenic painting, costume, props, stage management, box office, and house management. Students begin the process of career development through the creation of professional materials, such as resumes and portfolios.

    Prerequisites: (1) THEA 1120  must be completed prior to taking this course.
    Lec: 2.5 Lab: 4.5 Cr: 4


    View Class Schedule
  

  • THEA 2010 - Script Analysis

    4.5 Credits
    Students learn to do close readings of dramatic texts to explore themes and technical challenges. The course emphasizes analysis from technical, performance, and directorial points of view and the importance of unity in the technical elements of a production.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2020 - Fundamentals of Acting I

    4.5 Credits
    This is a basic acting course for students with limited acting experience who have an interest in studying the demands and the discipline of acting, especially in live theatre. Exercises in relaxation, movement, voice, concentration, trust, partner/group interaction, improvisation, imagination, and memorization prepare students for basic character and scene work.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2021 - Fundamentals of Acting II

    4.5 Credits
    This course is a continuation of THEA 2020  with further practice in characterization and scene work. Students develop two scenes and two monologues, with a focus on character development and the acting process.

    Prerequisites: (1) THEA 2020  must be completed prior to taking this course.
    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2030 - Playwriting I

    4.5 Credits
    This course is an introduction to the craft of the playwright. Students study the fundamentals of dialogue, character development, and scene structure through writing exercises, workshops, and discussion.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2031 - Playwriting II

    4.5 Credits
    This course is a further exploration of the craft of playwriting, focusing on non-traditional dramatic structure. Through independent study and in-class writing, students develop an appreciation for a variety of theatre styles, while stimulating their own creative output.

    Prerequisites: (1) THEA 2030  or instructor approval must be completed prior to taking this course.
    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2040 - Movement for the Actor

    4.5 Credits
    This course includes the study and practice of physical techniques and approaches used to develop physical self-awareness, freedom of expression, flexibility and endurance, awareness of space and time, centers, and energy for characterization and performance.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2050 - Voice for the Actor

    4.5 Credits
    Students study and practice vocal techniques to develop physical alignment and release, breathing and resonance, articulation and range, imagery, and text for performance.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2150 - Stage Rigging

    4.5 Credits
    The course builds on concepts and skills introduced in Theatre Technology I with specific emphasis on stage rigging. It covers rigging topics, including repair and maintenance, motorized rigging, trussing, and special applications, in the lecture portion and reinforces them during labs under non-production conditions. Students apply fundamental skills in the installation of flying scenery as well as use of stage rigging equipment under show conditions.

    Prerequisites: (1) THEA 1110  or instructor approval must be completed prior to taking this course.
    Lec: 2 Lab: 7.5 Cr: 4.5


    View Class Schedule
  

  • THEA 2160 - Principles of Stage Lighting

    4.5 Credits
    This course builds on concepts and skills introduced in THEA 1110  with specific emphasis on stage lighting. It covers lighting topics, including wiring and repair of electrical cables, basic color theory, and refraction principles, in the lecture portion and reinforces them during labs under non-production conditions. Students apply fundamental skills in light console operation and temporary installations of lighting systems under show conditions.

    Prerequisites: (1) THEA 1110  or instructor approval must be completed prior to taking this course.
    Lec: 2 Lab: 7.5 Cr: 4.5


    View Class Schedule
  

  • THEA 2170 - Stage Management

    4.5 Credits
    This course is an introduction to the creative and administrative work of stage management, including responsibilities and methods in rehearsal and productions, union considerations, and communication skills for collaboration.

    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • THEA 2900 - Special Topics in Theatre

    Variable Credits
    This course permits instruction in special content areas not included in other theatre courses.

    Prerequisites: (1) Instructor approval must be completed prior to taking this course.
    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule
  

  • THEA 2920 - Theatre Practicum

    Variable Credits
    Students earn credit for practical theatre production experience in topics such as design, construction, performance, and promotion.

    Prerequisites: (1) Instructor approval must be completed prior to taking this course.
    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule
  

  • THEA 2981 - Cooperative Study I

    4 Credits
    This course is the first in a series of apprenticeship courses in theatre technology. As part of the apprenticeship, individuals rotate through self-selected shop rotations throughout the year working alongside of Journeymen-Sponsors, and Master Craftsmen who are professional craftspeople in light and sound (in the electrics department), props, box office and stage management, and scenic painting. Secondarily, students work on actual productions to experience working under show conditions backstage.

    Lec: 0 Lab: 14.5 Cr: 4


    View Class Schedule
  

  • THEA 2982 - Cooperative Study II

    4 Credits
    This course is the second in a series of apprenticeship courses in theatre technology. As part of the apprenticeship, individuals rotate through self-selected shop rotations throughout the year working alongside of Journeymen-Sponsors and Master Craftsmen who are professional craftspeople in the theatre industry. The rotations may include work in the following craft areas: scene shop, costuming, light and sound (in the electrics department), props, box office and stage management, and scenic painting. Secondarily, students work on actual productions to experience working under show conditions backstage.

    Lec: 0 Lab: 14.5 Cr: 4


    View Class Schedule
  

  • THEA 2983 - Cooperative Study III

    4 Credits
    This course is the third in a series of apprenticeship courses in theatre technology. As part of the apprenticeship, individuals rotate through self-selected shop rotations throughout the year working alongside of Journeymen-Sponsors and Master Craftsmen who are professional craftspeople in the theatre industry. The rotations may include work in the following craft areas: scene shop, costuming, light and sound (in the electrics department), props, box office and stage management, and scenic painting. Secondarily, students work on actual productions to experience working under show conditions backstage.

    Lec: 0 Lab: 14.5 Cr: 4


    View Class Schedule
  

  • THEA 2984 - Cooperative Study IV

    4 Credits
    This course is the beginning of a second-year apprenticeship, where students arrange to work in a specific area in a specific craft with a specific Journeyman Sponsor over the course of the academic year. During the course of the year, students produce a capstone portfolio and develop a significant capstone project in cooperation with professional staff that demonstrates the apprentice has accumulated the skills of the trade to such a degree that they may find entry-level employment in the trade. Capstone experiences may include general technician, costuming, box office and stage management, props, scenic painting, and electrics (either lighting/sound or both). Second-year apprentices are expected to work behind the scenes on shows as well as in shops to prepare shows for the stage.

    Lec: 0 Lab: 14.5 Cr: 4


    View Class Schedule
  

  • THEA 2985 - Cooperative Study V

    4 Credits
    This course is the middle course of a second-year apprenticeship, where students arrange to work in a specific area in a specific craft with a specific Journeyman Sponsor over the course of the academic year. During the course of the year, students produce a capstone portfolio and develop a significant capstone project in cooperation with professional staff that demonstrates the apprentice has accumulated the skills of the trade to such a degree that they may find entry-level employment in the trade. Capstone experiences may include general technician, costuming, box office and stage management, props, scenic painting, and electrics (either lighting/sound or both). Second-year apprentices are expected to work behind the scenes on shows as well as in shops to prepare shows for the stage.

    Lec: 0 Lab: 14.5 Cr: 4


    View Class Schedule
  

  • THEA 2986 - Cooperative Study VI

    4 Credits
    This course is the final course of a second-year apprenticeship, where students arrange to work in a specific area in a specific craft with a specific Journeyman Sponsor over the course of the academic year. During the course of the year, students produce a capstone portfolio and develop a significant capstone project in cooperation with professional staff that demonstrates the apprentice has accumulated the skills of the trade to such a degree that they may find entry-level employment in the trade. Capstone experiences may include general technician, costuming, box office and stage management, props, scenic painting, and electrics (either lighting/sound or both). Second-year apprentices are expected to work behind the scenes on shows as well as in shops to prepare shows for the stage. Students who successfully complete the apprenticeship course sequences receive an apprentice certificate.

    Lec: 0 Lab: 14.5 Cr: 4


    View Class Schedule

Toyota
  

  • TTEN 1000 - Introduction to Toyota

    5 Credits
    Introduction to Toyota is required for all students entering MCC’s T-TEN program. Shop and environmental safety course will be assigned to be completed before students are able to work in the auto shop lab. Includes an introduction to the automotive industry including automotive history, safety practices, shop equipment and tools, vehicle subsystems, service publications, fasteners, professional responsibilities, and automotive maintenance. The policies and procedures needed for the student’s dealer internships will be covered. Toyota curriculum is infused to meet the requirements of T-TEN course T256. Instructor approval required. 11 lecture, 22 lab hrs/wk. (3-week course).

    Prerequisites: Students must have completed all of the requirements for admissions into the T-TEN program prior to taking this course.
    Lec: 3 Lab: 2 Cr: 5


    View Class Schedule
  

  • TTEN 1010 - Automotive Electrical Systems 1-TOYOTA

    6 Credits
    This is the first of two courses focusing on electrical and electronic systems for T-TEN students. Electrical theory, circuits, and devices such as batteries, starters, alternators and test meters will be covered. The identification of different types of circuits and how they work, including the application of Ohm’s law to demonstrate the relationship between current, voltage and resistance is also covered.  All concepts discussed in the classroom will be reinforced in lab. The integration of applied mathematics, chemistry, physics, and other scientific concepts is a large portion of this course. Practical skills established include: component identification, wiring techniques, test equipment usage, fault diagnostic strategies, safety practices, and appropriate work habits. Toyota curriculum is infused to meet the requirements of T-TEN course T623. Instructor approval required. 11 lecture, 22 lab hrs/wk. (4-week course).

    Prerequisites: TTEN 1000  must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 1020 - Automotive Electrical Systems 2 - Toyota

    6 Credits
    In part one of this sequence TTEN 1010  the topic of study was centered on basic electrical principles. The identification of different types of circuits and how they work, including the application of Ohm’s law to demonstrate the relationship between current, voltage and resistance was also covered. A continuance of the battery and starting systems will carry over briefly as a review and will be discussed when the topics applied to the concepts at hand. In this course we will take those concepts one-step further and apply them directly to the work that you’ll do anytime you diagnose an electrical problem. Drawing from your prior learning in part one of this sequence, you will apply that knowledge in detail toward the diagnosis of electrical systems utilizing all resources available.

    Prerequisites: TTEN 1010   must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 1100 - Suspension and Alignment - Toyota

    5 Credits
    This course concentrates on Toyota automotive suspension and steering systems including diagnosis and repair. Fundamentals of front and rear suspension, steering geometry, diagnosing suspension and steering problems, and overhaul techniques are covered in this course. Rebuilding and repair of the different types of front and rear suspensions including strut types are practiced. This course provides a detailed study of wheel balancing including radial force variation, computer controls for steering and suspension systems including inputs, logic, and actuators, and four wheel alignment. Wheel alignment factors and procedures, Steering and Handling concerns and diagnostics are also covered in detail. Instructor approval required. 11.5 lecture, 23 lab hrs/wk. (3-week course).

    Prerequisites: TTEN 1020   must be completed prior to taking this course.
    Lec: 3 Lab: 2 Cr: 5


    View Class Schedule
  

  • TTEN 1110 - Automotive Brakes - Toyota

    6 Credits
    This course is designed to teach students the principles of automotive brakes. Basic concepts and terminology, fundamental principles, diagnosis and overhaul techniques are an integral part of this course. Special emphasis is placed on the study, diagnosis and repair of braking systems found on late model, domestic and import vehicles. The student should acquire knowledge of brake systems and trouble-shooting procedures for disc and drum brakes. Students will be taught to properly use industry standard equipment to service disk and drum brake components and systems to manufacture standards. Computer controlled systems integrated into the automotive brake system will be studied.

    Prerequisites: TTEN 1100   must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 1120 - Internal Combustion Engines - Toyota

    6 Credits
    The operating principles and function of each of the major parts of the reciprocating piston internal combustion engine are presented and discussed.  Service, overhaul, and troubleshooting techniques as they relate to each component are also covered.

    Prerequisites: TTEN 1110   must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 2110 - Electronic Engine Controls 1 - Toyota

    6 Credits
    Electronic Engine Controls I is the first course of a two part engine performance series. The series is designed to provide the training to meet the requirements of NATEF for ASE certification area A8. Toyota curriculum is infused to meet the requirements of T-TEN course 852. The course will consist of six instructional units; Basic Engine Operation, Engine Controls Basics, Air Induction Systems, Ignition Systems, Fuel  Systems, Fuel Trim. Approximately one fourth of the class will be classroom and three fourths will consist of lecture/lab activities.

    Prerequisites: TTEN 1120   must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 2120 - Electronic Engine Controls 2 - Toyota

    6 Credits
    Electronic Engine Controls II is the second course of a two part engine performance series. The series is designed to provide the training to meet the requirements of NATEF for ASE certification area A8. Toyota curriculum is infused to meet the requirements of T-TEN course 852. Toyota course 874 curriculum is also infused in the series. The course will consist of four instructional units; No Start Diagnosis, OBDII Systems and Misfire, Engine Control System Diagnosis, and Emissions Systems. Approximately one fourth of the class will be classroom and three fourths will consist of lecture/lab activities.

    Prerequisites: TTEN 2110   must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 2200 - Automatic Transmissions - Toyota

    6 Credits
    This course includes instruction in automatic transmissions, including principles of operation, trouble-shooting and overhaul procedures. Instruction includes hydraulically-operated transmissions, transaxles, and torque converters common to the automotive field.

    Prerequisites: TTEN 2120   must be completed prior to taking this course.
    Lec: 4 Lab: 2 Cr: 6


    View Class Schedule
  

  • TTEN 2210 - Power Trains - Toyota

    5 Credits
    Power Trains details the theory, operation, diagnosis and service of modern drive train components. This includes information on the latest clutches, manual transmissions and transaxles, solid and independent rear axle assemblies, drive shafts, drive axles, U-joints and CV joints. Basic drive train components such as gears, bearings and seals are identified and explained.  This course also includes detailed explanations of the operation of electronically controlled systems.  Scan tool use and code retrieval to aid in diagnosis are also covered.

    Prerequisites: TTEN 2200   must be completed prior to taking this course.
    Lec: 3 Lab: 2 Cr: 5


    View Class Schedule
  

  • TTEN 2220 - Climate Control - Toyota

    5 Credits
    This course covers the automotive heating, ventilation, and air conditioning systems and the engine cooling system. Lecture sessions are devoted to the purpose, operational theory, and diagnostic processes common to each of the above areas. Lab sessions are provided to develop student skills in servicing, trouble-shooting, and repairing each component within the specific system. Students will work on both components and live vehicles as part of the learning process.

    Prerequisites: Take TTEN 2210 ; must be completed prior to taking this course.
    Lec: 3 Lab: 2 Cr: 5


    View Class Schedule
  

  • TTEN 2230 - Toyota Hybrid Vehicle Systems

    5.0 Credits
    Students are introduced to hybrid vehicles and associated hybrid systems.  Students learn to identify specific hybrid vehicle high voltage components. Students will also learn proper hybrid vehicle service and maintenance procedures.  

    Prerequisites: (1) TTEN 2120 must be completed prior to this course.
    Lec: 3.0 Lab: 2.0 Cr: 5.0


    View Class Schedule
  

  • TTEN 2981 - Toyota Cooperative Work Experience

    4 Credits
    Students apply their knowledge, learn new techniques, and receive on-the-job training at an automotive dealer or independent repair facility. Individualized, hands-on laboratory training utilizing live work is included in this course.

    Prerequisites: Instructor Approval must be completed prior to taking this course.
    Lec: 0 Lab: 12 Cr: 4


    View Class Schedule
  

  • TTEN 2982 - Toyota Cooperative Work Experience 2

    4 Credits
    Students apply their knowledge, learn new techniques, and receive on-the-job training at a Toyota automotive dealer facility. Individualized, hands-on laboratory training utilizing live work is included in this course.

    Prerequisites: Instructor Approval must be completed prior to taking this course.
    Lec: 0 Lab: 12 Cr: 4


    View Class Schedule
  

  • TTEN 2983 - Toyota Cooperative Work Experience 2

    4 Credits
    Students apply their knowledge, learn new techniques, and receive on-the-job training at a Toyota automotive dealer facility. Individualized, hands-on laboratory training utilizing live work is included in this course.

    Prerequisites: Instructor Approval must be completed prior to taking this course.
    Lec: 0 Lab: 12 Cr: 4


    View Class Schedule

Utility Line Technician
  

  • UTIL 1010 - Pole Climbing

    4.5 Credits
    Students learn proper and safe skills to climb wooden structures. Students learn the set-up, safety and operation of digger/derrick trucks.  NOTE: Completion of UTIL 1010 with a grade of C or better is required to advance to the next level class.

    Pre/Corequisite: (1) UTIL 1030  or instructor approval
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 1020 - Electricity I

    4.5 Credits
    Students learn about electrical theory, Ohm’s Law, series circuits, parallel circuits, series/parallel circuits including direct current (D.C.) and alternating current (A.C.). This course also covers inductance, capacitance and power factor.   NOTE: For students enrolled in the UTIL program, completion of UTIL 1020 with a grade of C or better is required to advance to the next level class.

    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 1030 - Ropes, Rigging, and Safety

    4.5 Credits
    Students explore and learn about tools, equipment, basic rope knots and splices. Students learn the set-up, safety and operation of the mini derrick machine.  NOTE: Completion of UTIL 1030 with a grade of C or better is required to advance to the next level class.

    Prerequisites: (1) UTIL 1010  or instructor approval
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 1110 - Line Construction I

    5.5 Credits
    Students learn to use hand tools, hand signals, basic wiring techniques, pole setting, framing and the use of vacuum excavation equipment. Students also learn to identify electrical apparatus.

    NOTE: Completion of UTIL 1110 with a grade of C or better is required to advance to the next level class.

    Pre/Corequisite: (1) UTIL 1030  
    Lec: 5 Lab: 1.5 Cr: 5.5


    View Class Schedule
  

  • UTIL 1240 - Underground Distribution Systems I

    4.5 Credits
    Students are introduced to URD systems, underground cables, and apparatus. Students learn various termination techniques and construct a model URD system in the lab.

    Prerequisites: (4) UTIL 1010 , UTIL 1020 , UTIL 1030  and UTIL 1110  all must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2020 - Transformer Theory

    4.5 Credits
    Students learn principles of electromagnetic induction, use and application of transformers, banking of transformers, calculating transformer loads, maintenance, testing, and proper connection of transformers.

    Prerequisites: (4) UTIL 1010 , UTIL 1020 , UTIL 1030  and UTIL 1110   must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2030 - Secondary Electrical Systems

    4.5 Credits
    Students learn the application of transformer banks, metering systems, and watt-hour meters. Students study the specifications and relationship to delivery systems for supplying various voltages.

    Prerequisites: (4) UTIL 1240 , UTIL 2020 , UTIL 2110  AND UTIL 2210  must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2110 - Line Construction II

    4.5 Credits
    Students practice skills needed for stringing and sagging wire, dead ends, anchoring, guying, clipping in, and splicing of overhead conductors. Students learn the set-up, safety and operation of aerial platforms.

    Prerequisites: (4) UTIL 1010 , UTIL 1020 , UTIL 1030  and UTIL 1110   all must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2210 - Overhead Distribution Systems I

    4.5 Credits
    Students explore the design and construction of overhead distribution systems involving staking and layout of lines using the National Electrical Code, National Safety Code, and construction specifications. Students learn safety and operation of skid steer machines and their attachments.

    Prerequisites: (4) UTIL 1010 , UTIL 1020 , UTIL 1030  and UTIL 1110  or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2220 - Overhead Distribution Systems II

    5.5 Credits
    Students participate in on-site field construction of overhead distribution systems using techniques previously studied.

    Prerequisites: (4) UTIL 1240 , UTIL 2020 , UTIL 2110  and UTIL 2210   all must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 5 Lab: 1.5 Cr: 5.5


    View Class Schedule
  

  • UTIL 2230 - Distribution Systems Maintenance

    4.5 Credits
    Students learn to use the proper tools, equipment and techniques for maintenance of overhead distribution systems.  Students use designated specifications to gain practical field experience.

    Prerequisites: (4) UTIL 1240 , UTIL 2020 , UTIL 2110  and UTIL 2210   all must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2240 - Underground Distribution Systems II

    4.5 Credits
    Students learn construction, maintenance and troubleshooting of underground distribution systems including trenching and termination, primary and secondary cables.

    Prerequisites: (4) UTIL 1240 , UTIL 2020 , UTIL 2110  and UTIL 2210  all must be completed with a grade of C or better or instructor approval must be completed prior to taking this course.
    Lec: 4 Lab: 1.5 Cr: 4.5


    View Class Schedule
  

  • UTIL 2981 - Internship

    8 Credits
    This is a supervised work experience for ten weeks and is normally a summer quarter activity following the completion of the UTIL coursework. Students submit regular reports while employed at an electrical utility or industrial plant. Students must have a Class A CDL and be certified in First AID/CPR to participate in an internship.  Based on state guidelines, students must complete 40 hours of work for each credit hour.

    Prerequisites: (1) Completion of Utility Line Technician program coursework or instructor approval must be completed prior to taking this course.
    Lec: 0 Lab: 40 Cr: 8


    View Class Schedule

Video/Audio Communication Arts
  

  • VACA 1020 - Audio I

    4.5 Credits
    This course is an introduction to the theory and application of the sound production process with emphasis on learning and practicing sound acquisition and recording techniques. Microphone acquisition, basic audio editing, and track mixing and sound for video and/or music are the basis for assignments.

    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 1110 - Introduction to Scriptwriting

    4.5 Credits
    This course introduces scriptwriting for video production, television, and motion picture film. Using the two-column and screenplay formats, students complete lab exercises and assignments about the structure of concept, treatment, and finished script. It reviews broadcast or corporate examples. Students can use the scripts for projects in Moving Image Lab, Video II, and Video III.

    Prerequisites: (1) English Level 1 course must be completed prior to taking this course.
    Recommended: ENGL 1010  
    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • VACA 1130 - Video I - Studio

    4.5 Credits
    This course is an introduction to the video medium. Students learn and practice the basics of operating a video camera, recording quality images and sound, and editing tape. Both studio and location assignments provide practical learning opportunities.

    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 1200 - Sound for Film

    4.5 Credits
    Offered: Online, Hybrid

    Students study the use of sound as a part of the storytelling process of film and video production. Students will approach audio recording, editing, and mixing from a digital cinema perspective. Students explore audio capture techniques for on-location sound, create foley sound effects, record and edit replacement dialogue, and develop multi-track soundscapes for a variety of moving image projects.

    Prerequisites: (2) VACA 1020 and PHOT 1500 must be completed prior to this course.
    Lec: 3.5 Lab: 3.0 Cr: 4.5


    View Class Schedule
  

  • VACA 2020 - Audio II

    4.5 Credits
    This course is a continuation of Audio I. Additional microphone and recording techniques are learned and practiced. Computer desktop editing and track mixing, recording, and editing are introduced and emphasized. Sound for video as well as digital media and the Internet are the basis for assignments.

    Prerequisites: (1) VACA 1020  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2030 - Audio III

    4.5 Credits
    This course includes advanced recording theory and application for use in the professional sound recording environment. It covers sound processing and mastering in depth.

    Prerequisites: (1) VACA 2020  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2050 - Pro-Tools

    4.5 Credits
    This course concentrates on the industry-standard Pro-Tools Digital Audio Workstation software and hardware. Students learn how to use advanced Pro-Tools techniques and concepts in the professional recording and editing environments.

    Prerequisites: (1) VACA 2020  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2060 - Audio Mixing and Summing

    4.5 Credits
    This course is an advanced study of procedures to achieve controlled mixes in the digital and analog mixing environments. It focuses on aspects of digital and analog summing, headroom, gain stages, subgroups, side-chair processing, hardware inserts, delay compensation, clocking, maintaining digital resolution, digital synchronization, A/D D/A conversion, sample rate conversion, dithering, serial order of processing, mid/side processing, and more. Students complete such assignments as signal flow drawings, equipment research, and a final project focusing on subgroup mixing techniques.

    Prerequisites: (3) VACA 1020 ; VACA 2020 ; and VACA 2050  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2080 - Surround Sound Mixing

    4.5 Credits
    Students are introduced to the processes of recording, mixing, and formatting surround sound for video and music.  Students become familiar with various surround formats and speaker set ups and complete a variety of video/music projects focusing on recording, mixing, and finalizing sound in the 5.1 surround field. All projects will be mixed in the 5.1 mix room, on the Pro Tools HD native system. 

    Prerequisites: (1) VACA 1020 must be completed prior to this course.
    Lec: 3.5 Lab: 3.0 Cr: 4.5


    View Class Schedule
  

  • VACA 2120 - Screenwriting Principles

    4.5 Credits
    This course is an overview of writing screenplays for motion picture film. It covers storytelling using the standard three-act screenplay structure and relates fundamental principles, including script format, structure, plot points, and character development, to sample scripts, films, and exercises.

    Prerequisites: (1) VACA 1110  must be completed prior to taking this course.
    Lec: 4.5 Lab: 0 Cr: 4.5


    View Class Schedule
  

  • VACA 2130 - Video II - Field

    4.5 Credits
    Camera operation, sound recording, and editing assignments provide an intermediate skill level of learning and practice. It introduces and applies lighting for the studio and on location.

    Prerequisites: (1) PHOT 1500  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2131 - Video III - Project Development

    4.5 Credits
    This course serves as a practicum for individual student productions. Students are responsible for the conception, production, direction, and post-production of a storytelling media program. Students achieve competence in planning and executing a script to a final product. The course reviews key production elements and critiques at each stage of the production.

    Prerequisites: (1) VACA 2130  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2220 - Digital Media Editing

    4.5 Credits
    This course serves as a practicum for digital production or post-production. Students are responsible for the conception, production, direction, and post-production of a media program directed toward digital delivery. The course reviews key production elements and critiques at each stage of the production.

    Prerequisites: (1) PHOT 1500  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2230 - Video Post-Production

    4.5 Credits
    This course is an introduction to digital applications, such as compositing and media compression for computer and Internet delivery. Students achieve basic competence in appropriate software applications as used in industry.

    Prerequisites: (1) VACA 1130  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2240 - Cinematography

    4.5 Credits
    This class is an exploration into the art of cinematography, including composition, camera movement and lighting as used in cinema production. Students study the art form and actively work with camera and lighting to gain better appreciation for the craft as well as gaining technical skills in cinematography.

    Prerequisites: (1) PHOT 1500  must be completed prior to taking this course.
    Lec: 3.5 Lab: 3 Cr: 4.5


    View Class Schedule
  

  • VACA 2250 - Art In Film

    4.5 Credits
    Offered: Online, Hybrid

    Students will examine the aesthetics of the art form (cinematography, sound and editing) and gain a greater understanding of the entire film making process. Students will also increase their appreciation for film as an art form, and discuss form, content, and the socio-historical context of the medium through the study of important movements in International cinema. Beyond analyzing the components of film making, students will delve into basic concepts of film theory, including the auteur theory, genre theory, the issue of audience identification and the concept of visual pleasure in narrative cinema. Students will also discuss the depiction of gender, race and class on the screen.

    Lec: 4.5 Lab: 0.0 Cr: 4.5


    View Class Schedule
  

  • VACA 2310 - The Business of Media

    4.5 Credits
    Offered: Online, Hybrid

    Students gain foundational knowledge of copyright, Fair Use, broadcast regulations, contracts, and entrepreneurship in the media entertainment industry. Students explore the basic legal considerations of starting their own production company including pricing, invoicing, insurance, and taxes.

    Recommended: ENGL 1010
    Lec: 4.5 Lab: 0.0 Cr: 4.5


    View Class Schedule
  

  • VACA 2540 - Video Portfolio Development

    3 Credits
    Students put the commercial application of the video process into finished form. Instructors advise students and critique their work. Students complete comprehensive portfolios of their work as their final products.

    Prerequisites: (1) VACA 2131  or instructor approval must be completed prior to taking this course.
    Lec: 1 Lab: 6 Cr: 3


    View Class Schedule
  

  • VACA 2900 - Special Topics in Video/Audio

    Variable Credits
    This course permits instruction in special content areas not included in other courses of the Video/Audio Communication Arts program.

    Prerequisites: (1) Instructor approval must be completed prior to taking this course.
    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule
  

  • VACA 2940 - MetroVision Practicum

    3 Credits
    This practicum is a studio and field production class. It is a hands-on opportunity for students to gain experience on location, in the studio, and with remote video productions. This course stresses the nature of collaborative work and various stages and processes involved with producing existing regularly scheduled productions. It may also include the development of new programming. Students gain advanced production experience with lighting, shooting, editing, directing, and producing MetroVision programming, which airs on a local cable television channel.

    Prerequisites: (1) PHOT 1500  must be completed prior to taking this course.
    Lec: 0 Lab: 9 Cr: 3


    View Class Schedule
  

  • VACA 2981 - Internship

    Variable Credits
    Through internships, students gain experience working in a professional video workplace performing a variety of functions, including set preparation, video production and post-production, and audio production and post-production. Based on state guidelines, students must complete 40 hours of work for each credit hour.

    Lec: Variable Lab: 0 Cr: Variable


    View Class Schedule

Welding
  

  • WELD 0900 - Introduction to Welding

    3 Credits
    This course introduces the basic principles and techniques for safe set-up, shut-down, and operation of a number of welding and welding-related processes, including oxy-acetylene, shielded metal arc (stick), gas metal arc (MIG), and gas tungsten arc welding (TIG).

    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1000 - Print Reading for Welders

    3 Credits
    This course is a good first welding course. Students learn the elements of print reading with special emphasis on interpreting welding symbols. The course covers basic welding information, such as process fundamentals and selection considerations, weld types, joint design, and welding terminology. Students successfully completing this course are well-prepared for success in the program.

    Lec: 3 Lab: 0 Cr: 3


    View Class Schedule
  

  • WELD 1100 - Industrial Cutting Processes

    3 Credits
    Students gain a working knowledge of oxy-fuel cutting (manual and machine), plasma cutting (manual and machine), and air carbon arc and plasma gouging.

    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1150 - Welded Sculpture I

    3 Credits
    Students learn the fundamental skills required to create sculptures in steel and copper using oxy-acetylene welding and cutting processes and related metal-working equipment. Students apply the basic elements and principles of design and practice achieving unity and harmony to a greater degree as they work on succeeding pieces.

    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1160 - Welded Sculpture II

    3 Credits
    Students learn the fundamental skills required to create sculptures in steel and copper using gas metal arc welding, plasma cutting processes, and other welding-related metal-working equipment. Students combine these skills with those learned in Welded Sculpture I, applying the basic elements and principles of design and practice achieving unity and harmony to a greater degree as they work on succeeding pieces.

    Prerequisites: (1) WELD 1150   must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1200 - Gas Metal Arc Welding (MIG) - Steel I

    3 Credits
    This course uses the theory and techniques in basic gas metal arc welding to produce sound fillet welds and sound groove welds in both the flat and vertical positions. Students weld using short-circuit and spray modes of metal transfer.

    Prerequisites: (1) WELD 1100  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1261 - Combination Welding - Automotive

    3 Credits
    This course acquaints students with the various welding and cutting techniques applicable to the automotive field.

    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1262 - Quick Start

    3 Credits
    This course gives students a quick start into a welding career by preparing them to pass the type of welding test given by many employers. Students learn the fundamentals of oxy-acetylene cutting, gas metal arc welding, and air carbon arc cutting. It also explores print reading for welders.

    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1300 - Oxy-Acetylene Welding

    3 Credits
    This course covers the basic skills and use of equipment necessary to be knowledgeable in this discipline. Students learn to weld various joint types in all positions with steel and braze filler materials. This is an excellent preparatory class for TIG welding classes.

    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1400 - Gas Tungsten Arc Welding (TIG) - Steel I

    3 Credits
    This course emphasizes the theory and techniques used in basic gas tungsten arc welding of steel fillet and groove welds in the flat and vertical positions. It covers the equipment and its proper adjustment and also includes the many types of tungsten electrodes and the use of different gases.

    Recommended: WELD 1300 
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1410 - Gas Tungsten Arc Welding (TIG) - Stainless I

    3 Credits
    This course emphasizes the theory and techniques used in basic gas tungsten arc welding of stainless steel in the flat and vertical positions. It covers the equipment and its proper adjustment and also includes the many types of tungsten electrodes and the use of different gases.

    Prerequisites: (1) WELD 1400  with a grade of C or better must be completed prior to taking this course.
    Recommended: WELD 1300
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1420 - Gas Tungsten Arc Welding (TIG) - Aluminum I

    3 Credits
    This course emphasizes the theory and techniques used in basic gas tungsten arc welding of aluminum in the flat and vertical positions. It covers the equipment and its proper adjustment and also includes the many types of tungsten electrodes and the use of different gases.

    Prerequisites: (1) WELD 1410  must be completed prior to taking this course.
    Recommended: WELD 1300
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1500 - Shielded Metal Arc Welding (Stick) - Flat

    3 Credits
    This course covers fundamental understanding and skills in the safe use of arc welding equipment. Typical operations include striking the arc, making fillet welds in the flat position, and making groove welds in the flat position. It uses a variety of methods to examine the weldments such as visual inspection, fillet weld break tests, and root/face bend test specimens.

    Prerequisites: (1) WELD 1100  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1510 - Shielded Metal Arc Welding (Stick) - Vertical

    3 Credits
    Vertical position weldments are basic to welding technology. This course studies and uses various techniques in the vertical position, including the use of E6010 and E7018 electrodes.

    Prerequisites: (1) WELD 1500  with a grade of C or better must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 1700 - Introductory Fabrication

    3 Credits
    This is a basic course in the fabrication of projects. It explores the use of layout tools and project drawings or sketches and emphasizes actual vs. estimated time and cost considerations.

    Prerequisites: (7) DRAF 1100 , WELD 1000 , WELD 1100 , WELD 2200 ; and WELD 1200 , WELD 1400 , and WELD 1500  with grades of C or better must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2200 - Gas Metal Arc Welding (MIG) - Steel II

    3 Credits
    This course is a continuation of GMAW - Steel I, including fillet and groove welds in the horizontal and overhead positions and the study of pulsed-spray transfer.

    Prerequisites: (1) WELD 1200  with a grade of C or better must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2220 - Gas Metal Arc Welding (MIG) - Stainless

    3 Credits
    This course is an advanced course covering gas metal arc welding of stainless steel in all positions using short-circuit and pulsed-spray modes of metal transfer.

    Prerequisites: (1) WELD 2200  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2230 - Gas Metal Arc Welding (MIG) - Aluminum

    3 Credits
    This is an advanced course covering gas metal arc welding of aluminum in all positions using short-circuit, spray, and pulsed-spray modes of metal transfer.

    Prerequisites: (1) WELD 2200  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2240 - Flux-Cored Arc Welding I

    3 Credits
    This course covers gas-shielded and self-shielded flux-cored arc welding in the flat and vertical positions using semiautomatic equipment.

    Prerequisites: (1) WELD 2200  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2241 - Flux-Cored Arc Welding II

    3 Credits
    This course covers gas-shielded and self-shielded flux-cored arc welding in the horizontal and overhead positions using semiautomatic equipment.

    Prerequisites: (1) WELD 2240  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2242 - Submerged Arc and Metal-Cored Welding

    3 Credits
    This course covers automatic submerged arc welding in the flat position, manual submerged arc welding in the horizontal position, and metal-cored welding of flat and horizontal fillet and groove welds using semiautomatic equipment.

    Prerequisites: (1) WELD 2200  must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
  

  • WELD 2400 - Gas Tungsten Arc Welding (TIG) - Steel II

    3 Credits
    This course is a continuation of Gas Tungsten Arc Welding - Steel I, covering welding in the horizontal and overhead positions. It includes the study of pulse-arc welding.

    Prerequisites: (1) WELD 1400  with a grade of C or better must be completed prior to taking this course.
    Lec: 2 Lab: 3 Cr: 3


    View Class Schedule
 

Page: 1 <- Back 10 … 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14